The use of electric rollers may cause oil leakage, and the areas prone to oil leakage are the end caps and their vicinity. In this issue of news and information, the editor will mainly explain the solution to the oil leakage of the electric drum end cover. Xiaomeng, let's learn about it together.
1. The left and right end caps of the electric drum and the rotating parts of the same coupling are leaking oil.
The solution is: if the skeleton oil seal is worn, tighten the spring coil on the skeleton oil seal or replace the skeleton oil seal by yourself.
2. The end cap oil plug is leaking oil.
The solution is to tighten the oil plug and replace the oil resistant rubber pad.
3. The joint between the end cover of the electric drum and the cylinder is leaking oil.
The solution is to check whether the connecting bolts are loose, and whether the exhaust plug and outlet channel are blocked, unblocked or cleaned.
The electric drum is mainly composed of a motor and a reducer, which are placed as a whole inside the drum. There is also a drum body inside, which is used to support the drive belt and make it move. It is necessary to connect the end cover, pressure cover, bearings and other components to the drum body itself, and use brackets and front and rear shafts to support the equipment as a whole. Undoubtedly, the motor, transmission mechanism, and other components make up the entire drum equipment and are an indispensable part of it.
Electric drum can replace the widely used motor reducer type external drive device, forming a belt conveyor that can transport bulk materials such as coal, ore, sand, cement, flour, etc. And it can also transport items such as burlap bags and equipment one by one.
The electric drum has good sealing performance and is suitable for wet and muddy workplaces with high dust concentration. Low energy consumption and easy to achieve centralized control. The structure is simple and compact, occupying little space. Easy maintenance, reliable operation, and long service life. It can meet various requirements such as non return, braking, and encapsulation.
The above is the solution to the oil leakage of the electric drum end cover. If users have similar problems during use, they can try using the above methods to solve them. During use, regular maintenance should be carried out, and the oil level should be checked before or after each use.
Editor: Chihiro
Language
