The electric drum relies on electrical energy to operate, so if the equipment needs to operate, it needs to be connected to electrical appliances. Therefore, the correct connection method is very important when connecting devices and appliances. If the connector of the electric drum is not connected correctly, the equipment will not work properly. Then let's briefly introduce how to operate the connector.
1. Electric drum equipment should be equipped with motor protection switches or relays.
2. The drum can be connected to a frequency converter. When connecting a frequency converter, it is necessary to avoid voltage oscillations caused by frequency resonance of the conductor on the motor. If the conductor is too long, it may cause frequency resonance between the frequency converter, conductor, and motor.
3.If the equipment of the electric drum overheats, the thermal protector of the equipment will be disconnected to provide good thermal protection for the motor. A relay or contactor protection device should be connected and adjusted according to the specific parameters of the current motor inspection.
4.There are two methods to randomly provide a wiring diagram to eliminate possible frequency resonance and limit the length of the conductor.
5.Before starting the electric drum, the operator must first confirm the correctness of the drum wiring, and then confirm that the drum equipment and belt can rotate normally.
According to the above introduction, if you encounter difficulties during the actual operation of the electric drum, you can follow the operation steps described above. If you encounter any problems during the connection process, you can consult our professional technical installation personnel.
Language
