What should be noted when replacing the sealing ring of the planetary electric drum

Planetary electric drum is a common industrial equipment, and replacing the sealing ring of planetary electric drum is a common maintenance work. The following are the precautions to be taken when replacing the sealing ring:
1. Safety measures: Before replacing the sealing ring of the planetary electric drum, be sure to disconnect the power and ensure that the equipment is in a stopped state to avoid accidental injury.
2. Choose the appropriate sealing ring: Select the appropriate sealing ring according to the model and specifications of the drum, ensuring that the size, material, and model of the sealing ring match the original.
3. Cleaning the work area: Before replacing the sealing ring, clean the work area and the surface of the drum to ensure that there are no dust, oil stains, or other debris to avoid affecting the sealing effect.
4. Disassemble the old sealing ring of the planetary electric drum: Use appropriate tools and methods to remove the old sealing ring from the drum, being careful not to damage the surface of the drum or other components.
5. Install new sealing ring: Install the new sealing ring on the drum in the correct direction and position, ensuring that the sealing ring is completely attached and not twisted or deformed.
6. Lubrication treatment: After replacing the sealing ring, lubricate the planetary electric drum as needed to ensure its normal operation and sealing effect.
7. Test run: After replacing the sealing ring, restart the equipment for test run to check the sealing effect and whether the equipment is running normally, ensuring the effectiveness of replacing the sealing ring.
8. Regular inspection: Regularly check the condition and sealing effect of the sealing ring. If any damage or leakage is found, replace or repair it in a timely manner to ensure the normal operation and safety of the equipment.
So when replacing the sealing ring of the planetary electric drum with a new one, everyone must pay attention to the above issues in order to ensure that the sealing ring we replaced is installed properly and the quality of replacement will also be improved. Here, the manufacturer still reminds everyone to clean it thoroughly before replacing it to avoid residual impurities that may cause poor sealing effect.