How to change the oil in the gearbox?

With the application of reducers in enterprises, many users are starting to consider a question: how should we change the oil when using them? In fact, the methods and steps are very simple, but mastering the correct processing methods is indeed important. So, let's learn about it together with the editor:
1. Firstly, it is necessary to cut off the power supply to prevent electric shock, and then wait for the gearbox to cool down and there is no risk of combustion before starting the oil change.
2. We can place an oil pan under the drain plug.

3. Then open the oil level plug, vent, and drain plug of the gearbox.
4. Remove and drain all the oil from the equipment.
5. Install a drain plug on the gearbox.
6. Tighten the oil level plug and vent of the equipment.
7. Remember to check the oil level at the oil level plug of the reducer and keep the oil level consistent with the installation position.
In addition, everyone should remember to install the oil drain plug, so that we can basically end the process of changing the oil in the gearbox. Following the above method can not only avoid the occurrence of faults, but also bring greater benefits to everyone and reduce maintenance time.